Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
Every technician is IICRC certified and has handled wall and drywall water damage many times. You get a clear plan before any work starts.
We look at the damage, explain what it needs and give you a written price before we start.
Most people who call us have never dealt with wall and drywall water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
Think of drywall as a wick. Once the base of a wall gets wet, moisture climbs through the paper and gypsum, commonly a foot or more higher than the water stood on the floor. From the room, the surface may seem dry and sound even though the hidden face and the insulation are saturated. Looks cannot be trusted here, so every wall gets tested with a meter.
Plenty of walls that get wet can stay. Firm panels wetted by clean water are frequently saved, in some cases with the baseboard taken off and small openings drilled so air can move inside the wall. Walls that are mushy, falling apart, moldy or contaminated get a flood cut instead, where our crew cuts straight across above the damage and takes out whatever sits under that line.
Water at the base of the wall soaks into the drywall edge and starts to climb. Baseboards and the bottom plate take on moisture.
The wet line rises higher, baseboards swell and paint begins to blister. Inside the cavity, the paper face becomes a place mold can begin.
Gypsum softens and the paper lets go. A musty odor grows stronger while the batts settle and mold covers more of the unseen face.
Mold and the start of decay show up on framing that has been wet the whole time. The amount of removal and reconstruction grows considerably.
Using meter readings and thermal images, our team outlines where the water went, upward and sideways, on both faces of the wall and in neighboring rooms.
Our call on each section, dry it or take it out, depends on water category, exposure time and the condition of the panel, and we explain it in plain terms.
Where the drywall stays, the trim is pulled and airflow is sent inside the wall. On sections coming out, a straight flood cut is made and soaked insulation is removed.
Air movers and dehumidifiers run until studs and remaining drywall read dry, typically 3 to 5 days. Then we insulate, hang and finish new drywall, reinstall trim and paint.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (623) 352-0605| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Baseboards and trim | Wood baseboards with no warp or splits once dry | MDF trim that has swollen or flaked at the edges |
| Outlets and switches | Devices that stayed above the wet line and test safe | Every device that was submerged or took on water |
| Drywall | Wet briefly by clean water and remains firm and flat | Anything mushy, puffed up, moldy or touched by gray or black water |
| Wall insulation | Rigid or spray foam of the closed cell type, which sheds water | Fiberglass and cellulose that got wet, because they slump and hold moisture |
| Plaster walls | Hard plaster that keeps its bond after drying | Areas that turn soft, powdery or separate from the lath |
Sections of wall covered by cabinets, a vanity or shelving stay damp because air never reaches them. Checking under the cabinet base and on the reverse face tells us if it is wet.
Once wet, fiberglass insulation stays wet and keeps the studs damp. A wall with wet insulation will not dry from the room side alone.
Paper lining, darkness and stagnant air make the hidden side of a wall a perfect place for mold. That side may be coated in growth even as the room side appears spotless.
Outside walls have sheathing past the insulation that can also get soaked. Because it is slow to dry, we test it before any new drywall goes up.
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (623) 352-0605Take action now and prevent costly damage. Lynchburg Restoration is ready to help.
Call (623) 352-0605 Now